420 Final Drive Assembly and Bearings

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
/J^
40C crawler
40C crawler
Posts: 17
Joined: Tue Oct 11, 2005 3:51 pm

420 Final Drive Assembly and Bearings

Post by /J^ » Thu Oct 20, 2005 6:28 pm

Does anyone know where I can buy bearings for my late '58 420? I need all of the bearings and parts for the axle shaft, including the oil seal and shims, but I do not need a spacer. I can list part numbers if needed. Someone who owned the crawler previously left their 1/4 inch socket in the housing. The bull gear is now perfectly flat without the slightest trace of teeth.
Thanks
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10949
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Thu Oct 20, 2005 7:21 pm

I have all of the parts for final drives, let me know what you need.
Lavoy
Top
/J^
40C crawler
40C crawler
Posts: 17
Joined: Tue Oct 11, 2005 3:51 pm

Post by /J^ » Thu Oct 20, 2005 8:34 pm

Okay, thanks. I talked to you a while ago about the pinion gear too, which I still need.
Thanks
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 129 guests