My MC must need a new thermostat!!!!!!!!!!!!!!!!!

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10955
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

My MC must need a new thermostat!!!!!!!!!!!!!!!!!

Post by Lavoy » Tue Dec 16, 2008 6:28 pm

Kind of thinking my MC needs a new thermostat. Was out pushing snow last night at -10 or so, and just could not get enough heat out of the heater. My fingers and nose were getting kind of cold, and the ice was freezing on my face. I had the fan turned up to 20 MPH out of the NW, but still no warm air. Funny thing is, couldn't get the damn air conditioning to work this summer either! :lol:
Lavoy

Pat
440 crawler
440 crawler
Posts: 144
Joined: Thu Dec 08, 2005 9:14 am
Location: Jacksonville NC

Post by Pat » Tue Dec 16, 2008 6:46 pm

My MC thermostat worked fine today. Heater held a steady 70 degrees with about a 4mph fan from the south, for most of the afternoon. Pat in sunny NC

User avatar
snoopy
440 crawler
440 crawler
Posts: 110
Joined: Tue Jan 29, 2008 12:18 pm
Location: Banks Oregon

Post by snoopy » Wed Dec 17, 2008 10:33 am

I am hoping that we get enough snow to fire up the MC. Usually do not get enough to worry about. Snowing heavy for here right now. expect to get maybe 6 inches. May have to look for that heater switch!! must be at least 26 degrees this morning!!!! That is cold for western Oregon!!!

Let it SNOW!!!!
1949 MC
"If it ain't broke, don't fix it"

User avatar
Gil
1010 crawler
1010 crawler
Posts: 362
Joined: Fri Dec 14, 2007 3:19 pm
Location: Pennsylvania

Post by Gil » Wed Dec 17, 2008 9:32 pm

I used to plow snow with my 440 but it never seemed to know if I was trying to plow snow or excavate a new driveway. It would just merrily chug along, pushing gravel into the lawn and skimming off the top layer of soil.
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs

mini kahuna
1010 crawler
1010 crawler
Posts: 301
Joined: Tue Oct 02, 2007 1:08 pm
Location: rhode island

Post by mini kahuna » Thu Dec 18, 2008 8:29 am

hey Lavoy,the fact that your sitting on a machine that is solid steel at -10 doesn't help much either!!
I was sent to minot a few years ago in jan for work,I learned you guys have a whole new meaning for the word cold,it was funny to see everyone cars,and things plugged in with the block heaters.

The Fireman
420 crawler
420 crawler
Posts: 33
Joined: Mon Aug 13, 2007 12:23 pm
Location: Upstate New York

Post by The Fireman » Fri Dec 19, 2008 2:31 pm

Gil wrote:I used to plow snow with my 440 but it never seemed to know if I was trying to plow snow or excavate a new driveway. It would just merrily chug along, pushing gravel into the lawn and skimming off the top layer of soil.
Thats half the fun, a crawler loader on a 440 really dose a good job at that also. On the plus side the teeth leave some nice ridges in the gravel for added traction with the truck :lol:

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Fri Dec 19, 2008 6:17 pm

This the time of year when you appreciate the fans that suck rather than blow. Happy Holidays, and may everyone's crawler start on demand.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

Ray III
2010 crawler
2010 crawler
Posts: 609
Joined: Sat Aug 25, 2007 1:39 pm
Location: Troy, NY

Post by Ray III » Sat Dec 20, 2008 4:46 pm

Any coolant ports on the front of the head? Maybe something could be cobbed up where you run a hose through the inside of the seat cushion. It's usually my fingers and toes that start complaining first, but you can always sit on your hands!

You can install shoes on the blade to prevent the lawn from looking like your driveway come spring. Without them I wouldn't bother unless the ground was well below freezing.

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests