Need a Air Cleaner cup

Crawlerbrad · Post by **Crawlerbrad** » Sat Jun 20, 2009 12:21 pm

Hello i am looking for the bottom of the air cleaner the cup. does anybody have one and for how much?? thanks

JimAnderson · Post by **JimAnderson** » Sat Jun 20, 2009 6:10 pm

Hello,
If no one on this site has one to spare then E-bay has them new
and they seem to be plentiful there.Hope this helps.
JimAnderson

ironyetty · Post by **ironyetty** » Sun Jun 21, 2009 8:59 am

For what it's worth, not sure what they cost or if you are wanting to keep it original, but a friend of mine made one out of a cheap pot like you can buy for camping. It not only worked but it looked damn near identical to the original.

Ironyetty

Post by **Lavoy** » Sun Jun 21, 2009 10:09 am

Depending on what crawler you have, I keep them in stock.
Lavoy

Crawlerbrad · Post by **Crawlerbrad** » Sun Jun 21, 2009 5:05 pm

sorry i did forgot to put what kind i had. i have a 440ic 1958 sn 448076
lavoy how much are they? thanks

Post by **Lavoy** » Mon Jun 22, 2009 8:32 am

Brad,
That crawler has the large air cleaner, I do not have one for that serial number range, sorry. I was thinking the earlier crawler.
Lavoy

Crawlerbrad · Post by **Crawlerbrad** » Mon Jun 22, 2009 7:34 pm

ok lavoy thats cool i will keep looking or if anybody knows of anyone that may have one. i tryed to get one new from john deere but they did not show it in the computer that they make any anymore.

BKahler · Post by **BKahler** » Tue Jun 23, 2009 3:42 am

My 440ICD didn't have the cup when I got it and I searched for several years. I finally found one on eBay that was partially rusted through. I gave it to a friend of mine to fix and he ended up finding a sauce pan at a Goodwill store that just fit so he cut the upper half off and then epoxied it to my old cup. It came out looking pretty darn good.

Good luck!

Brad

jac · Post by **jac** » Sun Jun 28, 2009 7:54 am

My 440ICD needed an air cleaner cup as well. Like Brad, I looked for a long time and finally found an entire air cleaner. If I recall, it came from Arkansas. My old cleaner was pretty beat up so I just replaced the entire unit. I think the only thing I saved from my old one was the cup clamp.

shinnery · Post by **shinnery** » Mon Jun 29, 2009 8:45 pm

My first 440ICD came with no filter assy at all. I searched for a while for the correct one then found a Baldwin dry element filter that had an outlet about the same size as the rubber elbow into the blower. i bought a piece of exhaust tubing to fit the filter about 18 +/- inches long. I had the muffler shop expand the other end slightly to fit snug in the rubber elbow. Now the filter lays on its side about where the original filter would have been. I can find the number of the filter if anyone is interested.
Bryce

JDcrawlers Messageboard

Need a Air Cleaner cup

Need a Air Cleaner cup

Aircleaner cup

Air Cleaner Cup

Who is online