General help and support for your Lindeman through 2010 John Deere crawler
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Dec 05, 2005 8:23 pm
Click on the
www.jdcrawlers.com llink at the top of the page and see what you think of the updated site. It is not completely finished yet, I need to completely redo the parts page, but it will give you an idea of what it will look like.
Hopefully once the parts page is updated, there will be a link to make it easier to order parts. There are some different ideas that we are playing with right now, but so far that is how the format will look. Take a look at it, and see what you think.
Lavoy
-
fishhawk
- 40C crawler
- Posts: 20
- Joined: Wed Nov 16, 2005 4:58 pm
- Location: central wis
Post
by fishhawk » Mon Dec 05, 2005 9:07 pm
wish there was a way to enlarge the photo's to get a better look at the toys!
-
BKahler
- 440 crawler
- Posts: 175
- Joined: Mon Apr 04, 2005 9:38 pm
- Location: Richmond, Kentucky
-
Contact:
Post
by BKahler » Mon Dec 05, 2005 10:01 pm
Lavoy,
Looks great
I've done a few web pages in the past and I know how hard it is to create a pleasing format.
Brad
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Dec 05, 2005 10:47 pm
If you click on the photo, it will give you a larger version.
Lavoy
-
Jimmy in NC
- 440 crawler
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
Post
by Jimmy in NC » Tue Dec 06, 2005 4:40 pm
Site looks good!
I really like the photo galleries!
Jimmy in NC
1957 420C 4 roller 4 spd #61 blade 107,xxx ser.
Hand clutches, not for everyone.
Steering clutches, for even less.
-
Howard Yoder
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Post
by Howard Yoder » Tue Dec 06, 2005 7:06 pm
I think it is really great. It's a lot eaier to use.
-
lowboy
- 420 crawler
- Posts: 26
- Joined: Fri Jul 15, 2005 3:52 pm
- Location: southern illinois
Post
by lowboy » Fri Dec 09, 2005 8:28 pm
Hello guys
I must being doing something wrong
2BLE click and the pix are still small
Looks good though Let us stupid people how to to do the new things
I have graduated up to 2 fingers so I need it to be simple
Lowboy
-
JD40c
- Site Admin
- Posts: 221
- Joined: Sun Apr 03, 2005 9:14 pm
- Location: Athena, OR
-
Contact:
Post
by JD40c » Sat Dec 10, 2005 3:38 pm
The thumbnails aren't currently linked to larger pictures. That may or may not be added later. I'm not sure if Lavoy still has the origional photo's.
1955 John Deere 40C 4-roller
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sat Dec 10, 2005 11:11 pm
I may have some of the photos, but very few. I misunderstood about larger pics, Jeremy corrected my mistake.
Lavoy
Who is online
Users browsing this forum: No registered users and 143 guests