parts needed, mounting plate, and more

[440icd]

1959 440icd
I ripped off the front mounting plate for my hydraulic pump.
I broke the casting that mounts onto the front of the Detroit 2 cyl.

Lavoy, do you have one of these?
it appears to just mount to the front of the motor.
The front hydraulic mounting plate has a few bolts that go into it this piece to attach it to the front of engine
I would take the plate, and bracket if you have it. They both were castings.
Do you have one or both?

anyone?

[Lavoy]

I defininitely do not have the casting, might have a mounting plate now that I think about it.
Lavoy

[440icd]

Got a couple people searching there inventory, but no luck on this part yet.
I may find out tomorrow.
it looks like they make no change (or they make no reference to ) from the gas to the diesel, but there was a break in the serial numbers, mine is a late model.
so If anyone can find one please let me know.
I also would like to find the hydraulic valve controls for a 831 loader.
the tilt power down is leaking a bit, I did put ne o-rings in there but they are in to bad of shape, so the bucket drifts. anyone go this? loader control block?

soon it will be raining and I will be stuck digging power trenches with the 51 hoe, in the mud again..