1010 oil seal installing info

spenceraucoin · Post by **spenceraucoin** » Wed Jan 06, 2010 6:32 pm

Hello need to know how to install the oil seal, there are two sides flat side and a lip side , does aneybody know the right way to install seal in quill???????????????????

Post by **Lavoy** » Wed Jan 06, 2010 7:40 pm

The lip towards the oil is a general rule.
Lavoy

spenceraucoin · Post by **spenceraucoin** » Wed Jan 06, 2010 8:33 pm

Thanks ,just figured out i put it in wrong. Is there a easy way to get the quill out without taking cluch housing off, not final, but the housing,can i take the back housing off and tap it out??????????

Post by **Lavoy** » Wed Jan 06, 2010 8:42 pm

I don't think so, I think you will have to pull the quill back off, and most likely it will wreck the seal when you take it out. I know it would if I was doing it.
Lavoy

JDcrawlers Messageboard