1010 Final Drive Housing COMPATIBLITY

John in MN. · Post by **John in MN.** » Mon Jan 02, 2006 10:38 am

My Final Drive Housing is cracked on my early 1010.

It looks like the RIGHT & LEFT SDES are the same ?????

QUESTION IS IN OBTAINING A REPLACEMENT - what MODELS maybe compatible -( eg. 40 / 420 / 430 / 440 / 1010 early- late / etc . ) ??

Thank You and HAPPY NEW YEAR

John

Post by **Lavoy** » Mon Jan 02, 2006 11:50 am

Yes, left and right are the same. Only compatability is maybe very late 440, and early 1010.
I have nothing on hand right now, but should be able to find you one if you want me to.
Lavoy

John in MN. · Post by **John in MN.** » Mon Jan 02, 2006 12:30 pm

Thanks Lavoy

I saw someone has some listed on ebay in NY -- but not sure about the application -- he has a casting number ( T12912T ) but it isn't what my parts book says --------- shipping can be $$$$$$$$$ so you like to know if its right -------- I've made errors in judgement before ....

John

Post by **Lavoy** » Mon Jan 02, 2006 5:31 pm

I think I know the ones your are talking about, and all I can say is be careful, I know someone that has had experience with the seller.
Lavoy

John in MN. · Post by **John in MN.** » Mon Jan 02, 2006 7:57 pm

Just one side question Lavoy where in ND are you ? My sister is in Whapeton.
John

Post by **Lavoy** » Mon Jan 02, 2006 9:20 pm

John,
Just SW of Fargo, 45 minutes or less to Wahpeton.
Lavoy

John in MN. · Post by **John in MN.** » Mon Jan 02, 2006 10:26 pm

Thanks again Lavoy --

I suppose this again isn't a tech question ------- but everyone knows everyone in the Dakotas -------- My Brother-inlaw operates P&K Machining out of Wahpeton.

I believe the person with the JD parts in NY is in Buffalo - calls himself Euclid ...

Do you deal some in tractor parts?

John

Post by **Lavoy** » Tue Jan 03, 2006 8:29 am

Don't recognize P & K, but I don't do any business in Wahpeton.
I have new tractor parts, no used unless it is something common with a crawler.
Lavoy

Howard Yoder · Post by **Howard Yoder** » Wed Jan 04, 2006 6:18 pm

John I have one off a 1010 that has the shifter on the dash and the reverser lever on the left dont have no serial # if interested you can either e-mail me at pcsaw@aol.com or call me at 740-604-0098 can't always anser the phone but you can leave a message. Thanks Howard

JDcrawlers Messageboard

1010 Final Drive Housing COMPATIBLITY

1010 Final Drive Housing COMPATIBLITY

Final Drive Housing 1010

Final Drive Housing 1010

Final Drive Housing 1010

Who is online