When I disassembled the final drives I failed to notice that the lock tabs on the washer that go on the end of the axle (inboard side of course/ two 1/2' bolts) were missing. This thing has been apart a few times in it's life it seems and they are all broke off.
Can I use Blue loctite in it's place or bad idea
Axle bolts on 420
-
- 420 crawler
- Posts: 38
- Joined: Sat Sep 23, 2006 12:20 pm
- Location: Columbus, Ohio
Lock tabs
The lock tabs are still available from Deere. I bought them about 2 months ago for $3.15, part # M2370T
1960 440 ICD with 602 blade
1960 440 ICD with 831 bucket
1960 440 ICD with 831 bucket, center throttle
1960 440 ICD with 831 bucket
1960 440 ICD with 831 bucket, center throttle
Who is online
Users browsing this forum: No registered users and 61 guests