Hi, I jacked up my JD40c and was surprised that the track plate pins were not as frozen as I thought. With a few well placed Hammer raps all but two (on the sprockets) seemed to surely be free enough to roll, so... What is a good way to attack stuck brakes or frozen clutch. I am a hair away from planks and rollers just thought I would ask.
Dana
JD40C
jd40c will roll now
Thanks for all of your help folks, SHE ROLLS!!!! By removing the quills I can now get her into my shop. More questions to surely follow.
Thanks again
Dana
Thanks again
Dana
Old and rusty, green, yellow & crusty.
-
Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
Great! These sorts of jobs are always one victory at a time!
later!
Stan
Great! These sorts of jobs are always one victory at a time!
later!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 125 guests