General help and support for your Lindeman through 2010 John Deere crawler
-
ptrachte
- 420 crawler
![420 crawler 420 crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 43
- Joined: Sat Nov 10, 2007 10:19 am
- Location: Oregon North Willamette Valley
-
Contact:
Post
by ptrachte » Sun Oct 17, 2010 9:42 pm
Hi all, its been a long time since i've posted. Hope all is well with everybody. Unfortunately, not all is well with my 1010 loader. The rails are starting to come apart. Both sides are really shot, but a pin is starting to come out on the right side, and the ralis themselves are not salvageable - too far gone. I'm going to need another set. Ugh. Please let me know if anybody sees a set for sale anywhare. I'll need pads on em too. My sprockets are good, but the rollers should be replaced too.
I know.... good luck...
Paul
Paul-1010 crawler/loader
-
Lavoy
- Site Admin
![Site Admin Site Admin](./images/ranks/wrench/spanner_rank_5_admin.gif)
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Oct 18, 2010 8:37 am
Paul,
If you need rails and pads, I would probably go to 350 rails.
lavoy
-
ptrachte
- 420 crawler
![420 crawler 420 crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 43
- Joined: Sat Nov 10, 2007 10:19 am
- Location: Oregon North Willamette Valley
-
Contact:
Post
by ptrachte » Mon Oct 18, 2010 10:12 am
Thought you might say that.
![Smile :-)](./images/smilies/icon_smile.gif)
How hard is it to put the 350 sprocket "ring" on? What is involved in installing them?
Paul
Paul-1010 crawler/loader
-
Lavoy
- Site Admin
![Site Admin Site Admin](./images/ranks/wrench/spanner_rank_5_admin.gif)
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Oct 18, 2010 1:30 pm
Not that big of a deal, you could do it yourself, or have it done at a machine shop.
I think my brother may have a set of 1010 rails that he is not going to use now, I can ask him if you want.
Lavoy
Who is online
Users browsing this forum: No registered users and 75 guests