430c Transmission Bearings
-
- 420 crawler
- Posts: 25
- Joined: Sat Apr 26, 2008 9:21 pm
430c Transmission Bearings
I've got my 1960 430c 4 speed out and completely apart. I have had pretty good luck rounding up most of the bearings, but I can't cross reference 3 of the bearing numbers: JD7938T, JD7939T, and JD8124T. I've been told that these are "captured" numbers. Does anyone know a replacement for these or are they Mother Deere only? Any help is greatly appreciated, John.
I put one of your numbers into JDParts and it came up as no longer available.
Your best option is to find a company that sells bearings locally and have them mic them out and order replacements for them.
I have a local company I buy my bearings from, they always check to see if the bearing are the correct ones when they come in.
Dan.
Your best option is to find a company that sells bearings locally and have them mic them out and order replacements for them.
I have a local company I buy my bearings from, they always check to see if the bearing are the correct ones when they come in.
Dan.
1956 420C with GSC blade
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
-
- 420 crawler
- Posts: 25
- Joined: Sat Apr 26, 2008 9:21 pm
I went to a second bearing company with the old bearings and dims. from jdparts.com. With a bit of searching they were able to find the 3 bearings I needed (cheaper than Deere). Lavoy, when they come in I'll get you the aftermarket brand and numbers if you want. I'm keeping a list of the brands and part numbers for future reference if anyone else needs it. John.
Who is online
Users browsing this forum: No registered users and 138 guests