40c with 350 chain and other goodies

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

40c with 350 chain and other goodies

Post by Paul Buhler » Wed Jan 05, 2011 4:23 pm

I have a 40c 4-roller with a brush cage and a 4-way hydraulic front blade. I just put new 350 chain on it with the slightly used 420 sprockets and that has worked out great. I added 2 hydraulic cylinders to make the blade have power angle. I'll post some pictures later ( I'm a little older and just gettting somewhat computer literate !)
doc40c: Have you gotten any pictures to share? Thanks. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

doc40c
420 crawler
420 crawler
Posts: 43
Joined: Sat Feb 13, 2010 10:43 pm
Location: michigan

40c with 350 chain pics

Post by doc40c » Sat Feb 12, 2011 3:51 pm

hi paul, i finally got some pics of my 40c with the 350 chain and 4-way blade. here's the link.
http://s1177.photobucket.com/albums/x342/doc40c/
any ? let me know.

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Sat Feb 12, 2011 10:22 pm

Thanks. Nice looking job. Looks like it should work well. I like your blade modifications too. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

User avatar
Bret4207
440 crawler
440 crawler
Posts: 169
Joined: Fri Apr 28, 2006 6:10 pm
Location: St Lawrence Valley NY

Post by Bret4207 » Fri Feb 18, 2011 7:35 pm

I'm also running 350 tracks on a 40. I'm getting away with using the worn 40 sprockets. Other than needing some different rollers, I've had no issues.
40C, 420C, 1010C-L-BH, Cat D4

Post Reply

Who is online

Users browsing this forum: No registered users and 72 guests