oil seal

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Sat Mar 05, 2011 5:02 pm

Im looking for the part number for the oil seal that goes inside the quill that boltes to the transmition case.This is for a late 440 #461907.I have the parts book for the 420 and 430 and I think that the number might be different

Thanks Ron
dose lavoy have thies?

CELSESSER · Post by **CELSESSER** » Sat Mar 05, 2011 5:18 pm

Ron,
The seal # is the same for 420,430 and 440 AM 1717 T. Diesel or gas.

Chuck

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Sat Mar 05, 2011 5:46 pm

Thanks now I can go to NAPA and have them cross this number

430c/440ic · Post by **430c/440ic** » Sat Mar 05, 2011 10:58 pm

mapaduke the JD seal number AM1717T crosses to a National Seal number 450083. Hope this helps.

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Sun Mar 06, 2011 8:19 am

Yes that will help .Tnanks.
It wood be nice to have a page on this sight with Deer part Numbers that cross to other manufacturers.That way anyone who nows a cross number can Post it in one location to help every one

Just a thought.

Post by **Lavoy** » Sun Mar 06, 2011 9:59 am

The seal you are going to get from NAPA or anybody else including Deere will not be the original style, and you will have to be a lot more careful when installing the quills so as not to roll the seal.
I have the correct seals on hand.
Lavoy

Gil · Post by **Gil** » Sun Mar 06, 2011 2:42 pm

mapaduke,
The cross-reference resource you referenced is available on this site: it is Lavoy. He spends a great deal of time finding currently available components to meet John Deere part number specifications that are either discontinued or a little too "deere". In some cases he actually fabricates the parts. He can supply them to you at reasonable prices and with the assurance that they will fit your application. What are you going to hear from the guys at NAPA when you take back the seal you tried to install and tell them it didn't fit right?

Just a thought. Gil

robk · Post by **robk** » Sun Mar 06, 2011 9:47 pm

We all worship at the altar of Lavoy Wilcox. No kool-aid, we're desperate.

Post by **Lavoy** » Mon Mar 07, 2011 10:39 am

Well not everyone is as desperate as Rob, but there is a special case in every crowd!

Lavoy

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Mon Mar 07, 2011 7:31 pm

I apologize if I offended anyone for wanting to look for parts elsewhere.I didn't see oil seals listed in the parts section of this sight.
I do appreciate all of Lavoys efforts and he is a true asset to our hobby.
Thanks Ron

robk · Post by **robk** » Mon Mar 07, 2011 8:33 pm

Hee-hee. I don't think you offended a soul Ron. Not to worry, we all have iron poor blood... I meant to give Lavoy a poke rather than a plug. And now our moderator can delete these last few silly messages as in no way having any redeeming social value - except to show that Ron is a nice guy.

JDcrawlers Messageboard

oil seal

oil seal

Who is online