master pin for 420c track

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
mc_mike
430 crawler
430 crawler
Posts: 98
Joined: Mon Nov 28, 2005 11:00 am
Location: Green Springs, Ohio

master pin for 420c track

Post by mc_mike » Wed Feb 15, 2006 8:07 pm

Does anyone know the dimensions of the track master pin for a 420c? Diameter, length, etc. The master pin that was in my track had a cotter pin in the end with several washers I don't think that is what is supposed to be in there. Does deere still offer them and how expensive are they? I was considering making one since I have access to a machine shop with heat treating capabilities so making them is not an issue for me.
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10948
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Wed Feb 15, 2006 9:00 pm

New ones are about $38 give or take.
Lavoy
Top
User avatar
fishhawk
40C crawler
40C crawler
Posts: 20
Joined: Wed Nov 16, 2005 4:58 pm
Location: central wis

Post by fishhawk » Wed Feb 15, 2006 9:10 pm

are the master pins for the 420 and the 440 the same? if so i got a master here from a 440 i can mic out. fishhawk
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 143 guests