440 with a loader
-
- 40C crawler
- Posts: 17
- Joined: Wed Apr 18, 2007 8:40 pm
440 with a loader
looking at a 440 with a diesel. been sitting for some time with the injectors out. they were rebuilt. the owner does not know how to time it. probably $1000 gets it. should i consider it or run? what kind of a job to get it running?
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
Timing the injectors is no big deal. It is like setting the valves, but you do need the little gauge that DD sells to set them. The service manual walks you through it. Also want to check the valve settings.
The hard part when they will not run is the hidden issues like drivetrain, steering brakes, etc, can lurk. But for a $1,000, you could part it out and be OK should the worst case be there.
The hard part when they will not run is the hidden issues like drivetrain, steering brakes, etc, can lurk. But for a $1,000, you could part it out and be OK should the worst case be there.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
Who is online
Users browsing this forum: No registered users and 157 guests