General help and support for your Lindeman through 2010 John Deere crawler
-
1959440icd
- MC crawler
- Posts: 8
- Joined: Sun Feb 08, 2009 7:48 pm
Post
by 1959440icd » Wed Apr 15, 2009 4:32 pm
I have a 59' 440 icd with a 6-way blade.
-
dtcohen
- MC crawler
- Posts: 2
- Joined: Wed Apr 15, 2009 4:44 pm
Post
by dtcohen » Thu Apr 16, 2009 3:55 pm
what if we have a 1010 and a 420?
-
tommyboy
- MC crawler
- Posts: 6
- Joined: Thu Apr 09, 2009 5:24 pm
- Location: Washington State
Post
by tommyboy » Sun Apr 26, 2009 4:11 pm
I have a 1010 with outside the tracks mounted blade, and a canopy.
JD 1010 Crawler Newbie
-
bingles
- 430 crawler
- Posts: 83
- Joined: Wed Sep 01, 2010 1:26 pm
- Location: Placerville
Post
by bingles » Sat Sep 25, 2010 9:17 pm
I have a 1010C with 4 in1 bucket and rippers in the back
JD1010C My first John Deere
-
happ
- 40C crawler
- Posts: 10
- Joined: Sun Jun 08, 2008 5:46 am
Post
by happ » Sun Sep 26, 2010 6:14 am
I have a 420C with clutch type reverser, 3pt, and #62 blade
-
happ
- 40C crawler
- Posts: 10
- Joined: Sun Jun 08, 2008 5:46 am
Post
by happ » Sun Sep 26, 2010 6:14 am
I have a 420C with clutch type reverser, 3pt, and #62 blade
-
fyrchieftx
- MC crawler
- Posts: 9
- Joined: Thu Apr 08, 2010 9:31 am
- Location: Fairfield, TX
Post
by fyrchieftx » Sun Sep 26, 2010 1:34 pm
1957 420c crawler loader w/rippers, and a rops
1957 420c Loader, 5-roller, 5-speed
-
derf
- 40C crawler
- Posts: 10
- Joined: Sun Jun 06, 2010 2:36 pm
- Location: Vancouver Island B C
Post
by derf » Sun Sep 26, 2010 3:59 pm
You can put me down for a mostly restored MC/blade, a parts 420/loader and a 440/blade
..........derf......
There is more to life than good gas milage
-
Willyr
- 2010 crawler
- Posts: 695
- Joined: Sat Jul 17, 2010 3:03 am
- Location: Downeast Maine (North of Ellsworth)
Post
by Willyr » Sun Sep 26, 2010 4:26 pm
1956 JD 420 Serial #93662 with aftermarket blade and a 10,000# winch on the backend.
Had one prior but didnt have the interest to know what it was and is long gone.
Otherwise I have had Case 350 with the 244 motor, does that count?
-
mapaduke@yahoo.com
- 1010 crawler
- Posts: 420
- Joined: Sun Sep 13, 2009 6:27 pm
- Location: Rochester N.H.
Post
by mapaduke@yahoo.com » Sun Sep 26, 2010 5:40 pm
I HAVE A 1950 MC ,1955 4O,1957 420,1959 430 AND A 1960 440
nothing crawles like a deere
-
robvds
- 40C crawler
- Posts: 12
- Joined: Wed Jun 23, 2010 7:57 pm
Post
by robvds » Sun Sep 26, 2010 6:58 pm
2010 here
-
Dana
- 40C crawler
- Posts: 15
- Joined: Sun Sep 26, 2010 5:05 pm
- Location: Lakeside, Oregon
Post
by Dana » Sun Sep 26, 2010 8:27 pm
One 40c
Old and rusty, green, yellow & crusty.
-
spud
- MC crawler
- Posts: 4
- Joined: Fri Feb 15, 2008 12:17 am
- Location: Washington State
Post
by spud » Sun Sep 26, 2010 10:44 pm
I have a 440IC Dozer, 1960.
-
CHA011
- 420 crawler
- Posts: 35
- Joined: Fri Oct 30, 2009 4:40 pm
- Location: northeast PA
Post
by CHA011 » Mon Sep 27, 2010 2:49 pm
Three 2010 loader bachhoe. Two will be considered rebuilt in good working order. One above S/N 42001 being used for parts.
-
Pat
- 440 crawler
- Posts: 144
- Joined: Thu Dec 08, 2005 9:14 am
- Location: Jacksonville NC
Post
by Pat » Mon Sep 27, 2010 7:45 pm
BO Lindeman's, MC's, 420c, 430c, 440c. Sold the 40.
Who is online
Users browsing this forum: No registered users and 103 guests