General help and support for your Lindeman through 2010 John Deere crawler
-
Tim_in_IA
- 430 crawler
- Posts: 87
- Joined: Fri Oct 13, 2006 7:07 pm
- Location: Eastern Iowa
-
Contact:
Post
by Tim_in_IA » Mon Oct 23, 2006 12:44 pm
I have a 440ic.
1958 440ic with blade
-
JL
- MC crawler
- Posts: 2
- Joined: Mon Oct 16, 2006 11:57 am
Post
by JL » Mon Oct 23, 2006 1:55 pm
I have a JD 40
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Mon Oct 23, 2006 9:25 pm
I have a 1010CA.
Bill Wattson
-
JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
Post
by JD440ICD2006 » Mon Oct 23, 2006 10:01 pm
Put me down for two, both 440s. One is an ICD and the other is an IC
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
-
tomcat4144
- 430 crawler
- Posts: 51
- Joined: Mon May 09, 2005 11:12 am
- Location: Kabetogama Mn.
Post
by tomcat4144 » Tue Oct 24, 2006 5:57 am
a 420c and a D4
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Tue Oct 24, 2006 8:29 am
i have a 420 with a #90 loader
-
jimengel
- MC crawler
- Posts: 5
- Joined: Tue Oct 10, 2006 10:24 am
- Location: Cambrridge, Vt
Post
by jimengel » Tue Oct 24, 2006 9:14 am
I have a 420 with blade
-
homer
- 40C crawler
- Posts: 11
- Joined: Wed Aug 30, 2006 10:15 am
- Location: Pflugerville, TX
Post
by homer » Tue Oct 24, 2006 10:50 am
put me in the 40C column - a 1955 4 roller
1955 - John Deere 40C
-
junkman
- MC crawler
- Posts: 2
- Joined: Sun Feb 05, 2006 5:50 pm
- Location: west georgia
Post
by junkman » Tue Oct 24, 2006 1:18 pm
420c with 3pt, 1952 mc
"one day I will finish it"
-
Howard Yoder
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Post
by Howard Yoder » Tue Oct 24, 2006 4:02 pm
2- 440icd, 430, and a mc
-
Mace Canute
- MC crawler
- Posts: 3
- Joined: Fri Oct 13, 2006 12:17 am
- Location: Saskatchewan
Post
by Mace Canute » Tue Oct 24, 2006 4:41 pm
I have a 420c with a #90 loader.
-
ggfossen
- 440 crawler
- Posts: 216
- Joined: Thu May 05, 2005 8:08 pm
- Location: Jacksonville, Oregon
Post
by ggfossen » Tue Oct 24, 2006 6:30 pm
1956 420 with Holt blade and 350 ROPS
-
sbarr
- 430 crawler
- Posts: 55
- Joined: Sun Jul 02, 2006 8:29 am
- Location: Pakenham Ontario Canada
Post
by sbarr » Tue Oct 24, 2006 7:41 pm
Two 420's for me,one with a henry loader and the other with a 61 blade,3 point hitch and a pto
58 420c w 61 blade and 3pth and pto,57 420c w loader,48 D,48 M,Allis D-15 and a Super Duty to haul these!!!!
-
airboater67
- MC crawler
- Posts: 4
- Joined: Tue Oct 03, 2006 5:17 pm
- Location: ponchatoula la.
Post
by airboater67 » Tue Oct 24, 2006 10:31 pm
1010 diesel
-
wrenchead
- 40C crawler
- Posts: 11
- Joined: Tue Oct 24, 2006 2:36 pm
- Location: Rutland, VT
Post
by wrenchead » Wed Oct 25, 2006 5:29 am
I have a 1958 440IC
Last edited by
wrenchead on Sun Dec 24, 2006 9:41 am, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 151 guests