General help and support for your Lindeman through 2010 John Deere crawler
-
digitup
- 1010 crawler
- Posts: 393
- Joined: Fri Dec 16, 2005 5:43 pm
- Location: Ontario
Post
by digitup » Thu Jan 25, 2007 4:18 pm
I got a 40C and a 450J and Two 550Js as well as a750B .Digitup.
-
tinman67
- MC crawler
- Posts: 5
- Joined: Tue Dec 19, 2006 6:41 pm
- Location: Napoleon, Ohio
Post
by tinman67 » Thu Jan 25, 2007 10:02 pm
MC here
-
Tigerhaze
- 350 crawler
- Posts: 2278
- Joined: Thu Jul 06, 2006 12:13 pm
- Location: West-Central MO
Post
by Tigerhaze » Fri Jan 26, 2007 11:19 am
Well, I thought it would be good to go through all of the posts in this thread to date and update the poll a little (hopefully you don't mind Tom) to see where we are at as a group. I only included the JD models and didn't list the model updates and variants seperately.
I also tried to catch the duplicate posts but my count may be off by one or two on each:
Model (QTY)
BO ( 1 )
MC ( 8 )
40 ( 12 )
420 ( 15 )
430 ( 6 )
440 ( 18 )
1010 ( 13 )
2010 ( 3 )
350 ( 4 )
450 ( 1 )
550 ( 2 )
750 ( 1 )
-
jdman123
- 40C crawler
- Posts: 17
- Joined: Mon Nov 27, 2006 7:17 pm
- Location: Athens, AL
Post
by jdman123 » Sat Jan 27, 2007 12:57 pm
Put me Down for a 420C 5 Roller
Shawn
430W, 420C 5 roller, H, MT, L
-
JR
- 420 crawler
- Posts: 36
- Joined: Thu Mar 16, 2006 4:45 pm
- Location: Vermont
Post
by JR » Sat Jan 27, 2007 3:12 pm
I have a straight 350 & Cat D3
-
MORT
- MC crawler
- Posts: 3
- Joined: Sat Jan 27, 2007 1:34 am
- Location: CALIFORNIA
Post
by MORT » Sat Jan 27, 2007 4:09 pm
I have a 420c
Thanks.
Mort
-
MORT
- MC crawler
- Posts: 3
- Joined: Sat Jan 27, 2007 1:34 am
- Location: CALIFORNIA
Post
by MORT » Sat Jan 27, 2007 11:27 pm
I have a 420C, whit is my first crawler. I am a new member. really enjoy this site.
Thanks. Mort
-
boon40
- MC crawler
- Posts: 4
- Joined: Wed Apr 06, 2005 7:36 pm
- Location: Howland,Maine
Post
by boon40 » Sun Jan 28, 2007 8:26 am
I have a 40C and an MC
-
ironyetty
- 430 crawler
- Posts: 89
- Joined: Fri Aug 04, 2006 5:40 pm
- Location: Fort Ashby, WV 26719
Post
by ironyetty » Sun Jan 28, 2007 8:37 am
I have a '63 2010 c loader and recently a new toy, a 440c dozer
IRONYETTY
-
Trucker Dan
- 40C crawler
- Posts: 19
- Joined: Tue Dec 05, 2006 1:09 pm
- Location: western Pa.
Post
by Trucker Dan » Wed Jan 31, 2007 7:14 am
Count me in for 1 1010 gas with a loader good running condition.
-
Lavoy
- Site Admin
- Posts: 10947
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Jan 31, 2007 10:28 am
Okay, most of these are my brother's, but will list them anyhow.
2-BO
3-MC, 2 will be sold though.
1-40
4-420, 1 is maybe leaving
2-440IC
3-1010
1-350
1-350B
T20
T340
T6
TD9
HD3
D2
-
Jimmy in NC
- 440 crawler
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
Post
by Jimmy in NC » Wed Jan 31, 2007 11:09 am
Lavoy-
When asked what model you own you should simply reply "Yes."
Jimmy in NC
1957 420C 4 roller 4 spd #61 blade 107,xxx ser.
Hand clutches, not for everyone.
Steering clutches, for even less.
-
MORT
- MC crawler
- Posts: 3
- Joined: Sat Jan 27, 2007 1:34 am
- Location: CALIFORNIA
Post
by MORT » Wed Jan 31, 2007 3:21 pm
I have a 1956 420c crawler.
Mort
-
Rex
- 420 crawler
- Posts: 29
- Joined: Mon Jan 15, 2007 4:42 am
- Location: New Zealand
Post
by Rex » Thu Feb 01, 2007 5:13 am
If I'm not too late count me in with a 3 roller 40c serial # 58 and a D2
-
Pammark
- 440 crawler
- Posts: 195
- Joined: Wed Jan 31, 2007 1:04 pm
- Location: Marysville, Ohio
Post
by Pammark » Thu Feb 01, 2007 11:29 am
I have a 2010
JD 2010 Crawler with Loader
Who is online
Users browsing this forum: No registered users and 110 guests