I just bought a JD440ICD with a Model 51 backhoe. Always wanted one. Now my challenge is to move it down to Gettysburg, PA from Oxford, CT; about 300 miles.
I only have a bumper pull 10,000 GVW trailer and this unit will weigh closer to 13,500 lb. I wouldn't mind hauling it if it was local, but I don't think I want to chance going across state lines into NY and CT.
Any suggestions on how I could locate a hauler? or if you know one, they can call me at 717-337-2280. Gil
Need inexpensive hauler from Connecticut to Pennsylvania
Need inexpensive hauler from Connecticut to Pennsylvania
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs
Have you tried Willy? That is the hauler that Lavoy has recommended in the past and if he is in your area he can give you a really good deal. he is out of Nebraska but travels nationally. However I am not sure if he goes that far northeast, and if you need it done immediately it can be tough to get him quickly on a set schedule.
I have also used a firm called MachineryLink to move large equipment- they are basically a transport broker that arranges with local haulers. However they are not very cheap. I used them mainly because they were affiliated with an auction I purchased a piece of machinery from and I figured I would have a little more leverage that way with scheduling.
Let me know if you need either of those numbers.
I have also used a firm called MachineryLink to move large equipment- they are basically a transport broker that arranges with local haulers. However they are not very cheap. I used them mainly because they were affiliated with an auction I purchased a piece of machinery from and I figured I would have a little more leverage that way with scheduling.
Let me know if you need either of those numbers.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
-
- 440 crawler
- Posts: 115
- Joined: Sun Jul 22, 2007 5:27 am
- Location: Hopewell NJ
Steve, on your suggestion, I called Rich Jennings and he seemed like a really decent guy. He had a good price, possibly because he makes this run frequently and could double a load. I look forward to working with him - and to getting my new JD440 backhoe! I hope the swing cylinder is in good shape. Gil
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs
Who is online
Users browsing this forum: No registered users and 106 guests