General help and support for your Lindeman through 2010 John Deere crawler
-
bingles
- 430 crawler
- Posts: 83
- Joined: Wed Sep 01, 2010 1:26 pm
- Location: Placerville
Post
by bingles » Wed Nov 02, 2011 3:17 pm
does anyone know if the 1010 had a front engine mount cross member. I got my new engine in but only thing I am finding that bolts to the front of the motor is my hydrolic pump and pully disconnect setup. I don't see anything that I pulled off anywhere that would support the front of the motor. I am missinh something?
my 2010 AG crawler has front cross member that secures the motor to the frame.
thanks in advance.
JD1010C My first John Deere
-
bingles
- 430 crawler
- Posts: 83
- Joined: Wed Sep 01, 2010 1:26 pm
- Location: Placerville
Post
by bingles » Thu Nov 03, 2011 3:32 pm
Jtrichards again came to the rescue. The 1010 doesnt have a front engine mount for anyone else that ever has this question.
As for my 1010 I will be making one that bolts between the hyd pump and disconnect and secures to the frame like the 2010 has.
JD1010C My first John Deere
-
KenP
- 350 crawler
- Posts: 824
- Joined: Tue Aug 26, 2008 2:05 pm
Post
by KenP » Thu Nov 03, 2011 5:46 pm
deleted
Last edited by
KenP on Fri May 31, 2013 2:50 pm, edited 1 time in total.
No longer posting on JDCrawlers
-
bingles
- 430 crawler
- Posts: 83
- Joined: Wed Sep 01, 2010 1:26 pm
- Location: Placerville
Post
by bingles » Thu Nov 03, 2011 5:51 pm
well it was just something my 2010 has, and I just put a 2010 motor in my 1010, but I guess your rigt probably don't need it since both motors weigh same.
JD1010C My first John Deere
-
bingles
- 430 crawler
- Posts: 83
- Joined: Wed Sep 01, 2010 1:26 pm
- Location: Placerville
Post
by bingles » Thu Nov 03, 2011 5:55 pm
well it was just something my 2010 has, and I just put a 2010 motor in my 1010, but I guess your rigt probably don't need it since both motors weigh same.
JD1010C My first John Deere
Who is online
Users browsing this forum: No registered users and 130 guests