Reverser question JD 420

[mc_mike]

If you remove a reverser from a transmission would the input shaft of the transmission mount up to the standard coupler on the clutch shaft from a non reverser equipped transmission? I guess what I am asking did JD use a different transmission input shaft for reverser equipped crawlers versus non-reverser equipped? I know the shaft from the clutch to the transmission is different, I am talking about the shaft in the tranny. Please let me know.

[Lavoy]

Input shaft is the same, you will need the standard prop shaft, and the standard front bearing quill to convert to non-reverser.
lavoy

[mc_mike]

Thank you for the info.