dammice

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
tinkerer
420 crawler
420 crawler
Posts: 32
Joined: Thu Apr 07, 2005 8:26 pm
Location: Middleburgh N.Y

dammice

Post by tinkerer » Wed Apr 27, 2005 5:03 pm

Has anyone had this happen to them?. Mice got into my 440 clutch housing and set up living quarters ,so when I started using my loader I upset them and they deceided relocate, but only after they did some sabotaging,by stuffing they nesting meterial in my clutch and throw out bearing. Now my clutch will not release, DamMice Anybody have a fix for this ? short of pulling the motor, this is sorta funny but (NOT!!!)I was hoping it was just a linkage adjustment.But oh no Dam MICE.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Wed Apr 27, 2005 7:34 pm

If you could harness the power of mouse pee and make it into a penetrating oil, you would be rich, because I have never found anything that will ruin an engine clutch as bad as that. As much as I hate to tell you, I will bet that you are going to have to split it and replace the clutch. I has this happen to a 430 once, and it had even eroded the teeth on the ringgear.
Lavoy

User avatar
tinkerer
420 crawler
420 crawler
Posts: 32
Joined: Thu Apr 07, 2005 8:26 pm
Location: Middleburgh N.Y

Post by tinkerer » Wed Apr 27, 2005 8:11 pm

DAM MICE

Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests