MT Valves adjustment
- 440 iron popper
- 1010 crawler
- Posts: 273
- Joined: Sun Sep 26, 2010 7:48 pm
- Location: Québec, Canada
MT Valves adjustment
A friend of Mine has a M tractor and he's rebuilding the engine. He asked me about the valves adjustment procedure. On my 440 it's: 1)Align the DC mark on the flywheel with the DC mark on the clutch housing. 2) Check that both rockers are loose on #1. Adjust both valves .015. Turn the crank 180 degrees. Adjust number 2 the same. Is it the same for a M tractor? Thanks.
440IC 1958 #443712, 602 blade, Gearmatic winch project in the back
440IC, serial tag gone, Blade with tilt
-------------------------------------------------------
440IC, serial tag gone, Blade with tilt
-------------------------------------------------------
Who is online
Users browsing this forum: No registered users and 139 guests