track rollers
track rollers
im i need of 4 track rollers the bushins got ply in them, mother deere wants $37/bushing. lookin for new or used.
-
jdemaris
Re: track rollers
I just bought 10 good used rollers. Two for $75 each and 8 for $100 each. Not exactly a bargain. Tractor salvage yard 20 miles from me has piles of them to fit 420/440/1010/2010/350/400G.NNAATZ wrote:im i need of 4 track rollers the bushins got ply in them, mother deere wants $37/bushing. lookin for new or used.
Ask Lavoy. If he can't help you - many salvage yards have them.
By the way I recently bought 10 brand new rollers for my Case 310. $130 each, brand new. Made by DCF of Korea. I bought them from a tractor place in MO. If I hadn't been in a hurry - I would of asked them if they can get new DCF rolllers for Deere. Cost $200 to ship them from one side of the country to the other.
thanks for the post, my puter was down for awhile. may i get a phone no. and name of the salvage yard? i will try lavoy too.
the more think, i'd rather have used, then some day replace all with new.
i knew the seals where bad, then about a year ago or so i buried in soft spot i was trying to clear out. i greased them as soon as i got it winched out (which was about 2 hrs.) to help push out the water. i believe that to be the beginning of end for them.
the more think, i'd rather have used, then some day replace all with new.
i knew the seals where bad, then about a year ago or so i buried in soft spot i was trying to clear out. i greased them as soon as i got it winched out (which was about 2 hrs.) to help push out the water. i believe that to be the beginning of end for them.
-
jdemaris
MacFaddens in Sharon Springs New York has piles of them already off the crawlers and stored in a trailer. $100 each.NNAATZ wrote:thanks for the post, my puter was down for awhile. may i get a phone no. and name of the salvage yard? i will try lavoy too.
the more think, i'd rather have used, then some day replace all with new.
i knew the seals where bad, then about a year ago or so i buried in soft spot i was trying to clear out. i greased them as soon as i got it winched out (which was about 2 hrs.) to help push out the water. i believe that to be the beginning of end for them.
MacFadden & Sons Inc.
1457 Hwy. Rte. 20
PO Box 220
Sharon Springs, NY 13459
Phone: (518) 284-2090
http://www.macfaddens.com/default.htm
Smiley's in Freehold, New York also has them for $75 each. But I don't trust him unless buying parts in person to check myself. I'd certainly never get anything from him otherwise. I just bought a set of almost new tracks from him that I took off a 1010 in his yard. Rollers were very good on it.
Address: 3493 Rt 67 Gayhead Rd, Freehold, NY 12431
Greene NY
Tel: (518) 634 2310
http://www.smileysequipment.com
Who is online
Users browsing this forum: No registered users and 7 guests
