420C with no engine driven (hyd) oil pump, is there a cover?

BLS · Post by **BLS** » Sat Jun 23, 2012 8:39 pm

Is there a plate that covers up the hole where the engine driven oil pump would go? I do not have a pump on the crawler and now that i got it started, i can see a little oil that has splattering from that area.
thank you
Brian

shinnery · Post by **shinnery** » Sat Jun 23, 2012 8:55 pm

I have never been into a vertical two cylinder John Deere engine but I thought the oil pump is in the pan and has a gear on it to drive off the camshaft. Then the distributor rotary shaft fits in a slot in the end of the oil pump shaft so it can turn.
Bryce

Willyr · Post by **Willyr** » Sat Jun 23, 2012 9:27 pm

He may be talking about the hydraulic pump at the front of the engine. Which has 2 bearings and the connections for the intake and hydraulic out.

BLS · Post by **BLS** » Sat Jun 23, 2012 9:36 pm

I ment the hydraulic pump. sorry for the confusion.

Willyr · Post by **Willyr** » Sun Jun 24, 2012 5:25 am

grin, didnt think you meant the engine oil pump.

I think that part will be a junkyard item. Lavoy might have it. (the whole pump)

BLS · Post by **BLS** » Mon Jun 25, 2012 8:26 am

Ralph,
sent you a pm
Brian

JDcrawlers Messageboard

420C with no engine driven (hyd) oil pump, is there a cover?

420C with no engine driven (hyd) oil pump, is there a cover?

Who is online