bad memory

[Eric.MacLeod]

hello, ive put my 420 on the back burner for so long that i cant remember what these parts where for,18520,,18590,,15123,, and 15245..these are most likley for the rearend, i never could get the quills apart. im hoping that i can get away without having to take those apart because thats why i gave up on it in the first place.. thanks..Eric.

[Paul Buhler]

Go to the john Deere web site, enter "420" for model, and down load the PC505 .pdf manual to find part numbers and parts pictures. Good luck. Paul

http://jdpc.deere.com/jdpc/servlet/com. ... ervlet_Alt

[gus]

hello, ive put my 420 on the back burner for so long that i cant remember what these parts where for,18520,,18590,,15123,, and 15245..these are most likley for the rearend, i never could get the quills apart. im hoping that i can get away without having to take those apart because thats why i gave up on it in the first place.. thanks..Eric.

When I was rebuilding mine, I almost didn't take the quills out either. It would have been a bad mistake. I found all sorts of problems there from worn linkage, no lubrication, bad seals to broken bolts. On Lavoys advise, I looked in EVERYTHING. If I hadn't, I would have been back in there after a few hours of run time.

If you're that far apart...look.

[Eric.MacLeod]

thanks guys when i looked at the drawings on the deere website i can see where the bearings go,thanks.. now to put this darn thing back together...Eric.