steering pressure plate adjustment

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
rrwayside
40C crawler
40C crawler
Posts: 18
Joined: Sun Jun 03, 2012 4:24 pm
Location: Lowville NY

steering pressure plate adjustment

Post by rrwayside » Sun Jul 22, 2012 6:13 pm

Just bought the gauge to adjust the fingers on the steering pressure plate,not sure where to measure to and from.There is three different heights on the gauge.I assume you measure off the drum to where the throw out bearing hits the fingers.Just want to be sure.This is for a 1010.
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11117
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Mon Jul 23, 2012 7:45 am

Go to the FAQ's section of this message board, the factory service bulletin for adjusting is posted there.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
Tigerhaze
350 crawler
350 crawler
Posts: 2278
Joined: Thu Jul 06, 2006 12:13 pm
Location: West-Central MO

Post by Tigerhaze » Mon Jul 23, 2012 9:27 am

In case you couldn't find it:

http://www.jdcrawlers.com/messageboard/ ... php?t=1518
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 28 guests