Hi,
In getting ready for winter, I need to get some lights working on my crawler. The old lights are there but the wires are gone, I ran a new line to the lights in the grill from the switch - the generator light stayed on (makes me think there was some kind of polrization) and no lights. Or maybe the switch is bad... In reviewing the manual, it shows the hot wire going from the switch out to the lights and ground is directly to the chassis.
Second question is even with the existing lights working it doesn't seem like they will be bright enough (I will be moving snow at night from time to time). Has anyone installed other lights? Where could I mount them? Perhaps if I were construct a cab... Any ideas or comments would be welcome.
Jim
1966 JD 1010 crawler / loader - lights - electrical
- Jim DiDomenico
- 40C crawler
- Posts: 14
- Joined: Wed Aug 22, 2012 4:53 am
- Location: Connecticut & Vermont
- Contact:
1966 JD 1010 crawler / loader - lights - electrical
Jim
1965 1010 crawler/loader
1965 1010 crawler/loader
Changing out the existing lights to halogen is a huge jump in brightness. If you want even more, I have HID llights available now as well.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Jim DiDomenico
- 40C crawler
- Posts: 14
- Joined: Wed Aug 22, 2012 4:53 am
- Location: Connecticut & Vermont
- Contact:
Who is online
Users browsing this forum: No registered users and 142 guests