440icd trans prob
440icd trans prob
Hi newly registered but been viewing a while. I have a 440icd thats popping out of 2rd when not on much of a load.I am thinking about redoing the trans if i have to but wondering if anyone has any input on what i might be looking for (maybe something as simple as taking top off for shifting forks) The other thing i am curious about is it doesnt have a reverser but i would like to add one. i would think the trans is the same so what would be involved, and what prices would i might (lol) expect? thanks... this is my second 440icd and its so much more simple than the 450C i have.
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Sometimes if they have been run long enough with a bad bearing, the gear will wear at a taper too, which will only make the problem worse.
If you want to add a reverser, while you are working on the trans is a good time to do it.
I have a complete reverser assembly if you decide to go that route.
Lavoy
If you want to add a reverser, while you are working on the trans is a good time to do it.
I have a complete reverser assembly if you decide to go that route.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
It would depend on how much of the parts you need. Shoot me an e-mail with serial number, and we can figure out how much of it you will need. I don't have the reverser here, but can run out and get it easily.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 147 guests