winch
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
winch
Anyone know where I can get a hydraulic controller for my gearmatic winch? gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
- 2010 crawler
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Skidder parts
You may want to check with a forestry equipment wrecker. Gearmatic winches were used on Deere, Clark and Timber Jack skidders.
These are however an aluminum assembly and not the factory Deere cast unit.
These are however an aluminum assembly and not the factory Deere cast unit.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
winch
Thanks Jason. I don't really care what it's made of or who made it. I'd use anything that works correctly. I'm considering fabricating one. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
- MC crawler
- Posts: 9
- Joined: Tue Nov 06, 2012 2:39 pm
- Location: British Columbia, Canada
Gearmatic Control
Hi Don't know if you have an exchange but www.forestryconstruction.com list a rebuilt Gearmatic control on their website. under Inventory/Miscellaneous. Item SKU002 Gearmatic Master Control Rebuilt Exchange. Hope this is of some help.
1956 JD 420C with Gearmatic model JD40 blade & 8A winch, 1935 Caterpillar 22, 1948 Ford 8N
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
winch
Thanks Reg Taylor--I checked it out. $650 exchanged is too much for me and I don't have a complete exchange. I think I'm going to build one using 2 auto brake master cylinders and it'll only cost around $100.00. It will also give me something to do and keep me out of trouble. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: B Town and 67 guests