General help and support for your Lindeman through 2010 John Deere crawler
-
gus
- 2010 crawler
- Posts: 723
- Joined: Mon Jul 16, 2007 11:55 am
- Location: North West
-
Contact:
Post
by gus » Tue Aug 06, 2013 6:43 pm
Crappy job to do today. I had to mow 6 hillside lots. It was hot (96) and dry. I took the 420 with a brush hog mower in to town to do the job. I was figuring most of the day.
I was done in 2 1/2 hours. That little crawler is MEAN!!! I took it straight up some steep slopes mowing in 2nd gear. The only time I used 1st was in the first round on the edges to see what I was getting into. The last guy that bladed the lots this left some big dirt/weed humps. When I saw one ahead, I just lowered the blade and flattened them as I mowed.
To say the least, I was impressed with the machine. Those lots are too steep for a wheel tractor to safely be on. I had some reservations about mowing them. No more!!
-
Howard Yoder
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Post
by Howard Yoder » Wed Aug 07, 2013 1:30 pm
do you have a 3 point that would have made some interesting pictures
-
gus
- 2010 crawler
- Posts: 723
- Joined: Mon Jul 16, 2007 11:55 am
- Location: North West
-
Contact:
Post
by gus » Wed Aug 07, 2013 3:15 pm
Howard Yoder wrote:do you have a 3 point that would have made some interesting pictures
Look in the thread on Hyd pressure, there's photos. Just posted them. I have one with it on the trailer but not posted. I would have liked some photos while I was mowing but no one around to take them.
-
gus
- 2010 crawler
- Posts: 723
- Joined: Mon Jul 16, 2007 11:55 am
- Location: North West
-
Contact:
Post
by gus » Thu Aug 08, 2013 11:33 am
ready to go to work...
Who is online
Users browsing this forum: No registered users and 347 guests
