59 icd crawler help

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
trant156
MC crawler
MC crawler
Posts: 3
Joined: Thu Apr 03, 2014 6:37 pm

59 icd crawler help

Post by trant156 » Sun Apr 06, 2014 4:01 pm

I have a few questions hoping I can get answers to.first previous owner was killing tractor by piping clutch the cable from kill knob is not connected can any one tell where it hooks to or a diagram,is there a preheat for glow plugs I thought you turned key to left for awhile but this doesn't help and shouldn't I hear a click.also where do I check hydrological level? Yes it is my first machine and I know nothing about it. Thanks for any help.

User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 437
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

Post by DukeofDeere » Sun Apr 06, 2014 8:19 pm

Best to get a parts manual and a service manual from Deere.
You will sure need them.

Duke

User avatar
shinnery
350 crawler
350 crawler
Posts: 768
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Sun Apr 06, 2014 8:20 pm

If you have a 440ICD with the Detroit Diesel 2-53 diesel engine there are NO glow plugs. Use just a little ether in the intake. The kill cable connects to the throttle linkage at the back of the engine near where it goes in the valve cover. It is supposed to force the linkage further to the idle or off position into the valve cover. Not sure what a hydrological level is?
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 437
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

Post by DukeofDeere » Mon Apr 07, 2014 5:47 am

Best to get a parts manual and a service manual from Deere.
You will sure need them.

Duke

User avatar
JD40c
Site Admin
Site Admin
Posts: 221
Joined: Sun Apr 03, 2005 9:14 pm
Location: Athena, OR
Contact:

Post by JD40c » Sun Apr 13, 2014 7:01 am

I think he meant hydraulic fluid level.
1955 John Deere 40C 4-roller

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10407
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Sun Apr 13, 2014 8:27 am

Hyd reservoir is under the front RH door on the hood.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests