axle
- Eric.MacLeod
- 440 crawler
- Posts: 120
- Joined: Sun Feb 10, 2008 9:15 pm
- Location: wells,maine
axle
hello, I have the axles out of my boys 420 dozer, they are worn around the seal surface. I have seen people repair them with a reddi- sleeve and I would like to do this to.does anyone have a part number or any recommendations? thank you.Eric.
Tough to do on a 420, you have to cut the sleeve back pretty far to make sure it does no interfere with the bearing. Did it once, it just split the sleeve in two because I did not cut it back far enough.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
That is what I use, pretty much only thing as far as that goes.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 134 guests