1967 1010 need parts

jblair34 · Post by **jblair34** » Wed Sep 24, 2014 6:44 pm

The four speed gear shifter is in the dash also and it is on the right side and reverser is on left side of dash.

jtrichard · Post by **jtrichard** » Wed Sep 24, 2014 7:54 pm

that sounds like a very early unit look at post #3 here http://www.jdcrawlers.com/messageboard/ ... al+numbers

jblair34 · Post by **jblair34** » Thu Sep 25, 2014 1:35 pm

Good info thanks. My serial # plate is M.I.A so will have to just look threw the different changes over the years to narrow it down.

jblair34 · Post by **jblair34** » Tue Oct 21, 2014 7:07 pm

Got my parts today from Lavoy and it was quick and easy and the parts are top of the line. I couldn't be more impressed with the money I paid and the parts I received. Just wanted to thank you again. Josh

Post by **Lavoy** » Wed Oct 22, 2014 7:50 am

No problem.
Lavoy

jblair34 · Post by **jblair34** » Fri Nov 28, 2014 11:13 am

well no luck with a new input shaft and gear cluster so i took it to Huntington plating and they had to nickel and then chrome it to fit the bearings. boy did that cost me.

JDcrawlers Messageboard

1967 1010 need parts

1967 dozer

serial number

Parts 1967 JD Crawler

Who is online