mc rails n pads
-
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
mc rails n pads
have new pads on some rails that seem the pins and bushings are wore a little but have really good pins and bushings on another set that the pads are really sloppy so should I change the pads or will they just come loose on the other rails or should I just change the hole set of tracts rails and pads this is on an mc
Tighten them down tight, it will work. You might have to retighten a selected pad or two, but that is it.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Who is online
Users browsing this forum: No registered users and 58 guests