Replacement O-Ring seals for Hydraulic Snap in for 1950MC 40

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
RHT
40C crawler
40C crawler
Posts: 18
Joined: Tue Nov 04, 2014 7:09 pm
Location: Canisteo, NY

Replacement O-Ring seals for Hydraulic Snap in for 1950MC 40

Post by RHT » Thu Nov 06, 2014 11:04 am

Cannot anyone tell me where I can find a parts listing for the O-Ring seals which are on the 2 hydraulic lines behind the seat. The previous owner has a bungee strap to anchor them in but they still leak. This is for a 1950 MC 40 Crawler which has a aftermarket blade installed. Thank you
RHT
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10945
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Nov 07, 2014 11:34 am

Listed in the regular parts manual.
just for clarification, you have an me MC or a 40, not both. If it is a 1950, then it is an mc. There are some parts differences between the models.
lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 86 guests