General help and support for your Lindeman through 2010 John Deere crawler
-
CPeter
- MC crawler
- Posts: 6
- Joined: Tue Aug 01, 2006 1:31 pm
Post
by CPeter » Tue Aug 01, 2006 4:15 pm
Some time ago (2 or 3 years) I got some information on a seal conversion kit for JD rolls and idlers on Dubuque crawlers that someone in the mid-west was making. The price was under $50 for a whole set. It consisted of two new thrust plates and two lip type seals. I have lost the information. Has anyone e4lse seen or heard of this?
CPeter
40C, 420U, Dubuques for 35 years
-
Lavoy
- Site Admin
- Posts: 10952
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Aug 01, 2006 4:20 pm
Peter,
Tony Hahn was making them, not sure if he still is or not, I have not heard from him for a while.
The good news, is the correct seal is now only about $13 instead of $65. I have some on hand if you need them.
Lavoy
-
CPeter
- MC crawler
- Posts: 6
- Joined: Tue Aug 01, 2006 1:31 pm
Post
by CPeter » Tue Aug 01, 2006 6:06 pm
That is the name, thanks. Also, thanks for the info on the correct ones. I have one roll that leaks. The other 7 and the idlers seem OK.
CPeter
40C, 420U, Dubuques for 35 years
Who is online
Users browsing this forum: No registered users and 63 guests