John Deere 430W with a 430C Centerframe?
-
- MC crawler
- Posts: 6
- Joined: Sun Aug 19, 2012 12:32 am
- Location: Warburg Alberta
John Deere 430W with a 430C Centerframe?
Hi, a question for the JD 430 owners, I am looking at buying a John Deere 430W. The center frame looks like it came from a 430 crawler as it has a brake pedal on the right hand side along with the two normal brake pedals. Were these center frames interchangeable and if so is it difficult to find parts to remove the crawler brake so it looks correct? The center frame part number is AM3333T. Thanks for any help.
-
- 1010 crawler
- Posts: 305
- Joined: Mon Apr 04, 2005 7:01 pm
- Location: Gloucester,Virginia
430
You might make that center frame work but you will never make it look like a 430c.The 430c had two seperate parts to connect the engine to
the transmission.The parts you are looking at is one part and the clutch linkage is internal.I own a 430T and four 430Cs and there are some parts that are interchangeable but not the parts you are looking at.
JimAnderson
the transmission.The parts you are looking at is one part and the clutch linkage is internal.I own a 430T and four 430Cs and there are some parts that are interchangeable but not the parts you are looking at.
JimAnderson
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
I had a 430w and the center frame was completely different from my 420c.
But then, the 430w was live PTO (integrated bell housing and center frame) and the 420c has a reverser (separate bell housing and center frame is the reverser housing)....
Stan
I had a 430w and the center frame was completely different from my 420c.
But then, the 430w was live PTO (integrated bell housing and center frame) and the 420c has a reverser (separate bell housing and center frame is the reverser housing)....
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 49 guests