Hello
There is a brand new / old set of 2010 sprockets for sale nearby. The picture shows the hub bolt pattern and it appears the same as my 420....6 holes for bolts and 3 stud holes.
Did 2010 have the same pitch track as the 420 and would the bushing OD be the same as the 420 or a 350??
thanking everyone that responds. I want a good track system
2010 sprockets
It could be either bushing size, but if you are looking at them for a 420, not even remotely close to working.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
They will not fit, no amount of machining will work, they are larger in diameter, and different in offset.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Hi Danny-
If not useful for you, can you provide the contact information on the 2010 sprockets and whether they are early or late part number?
If not useful for you, can you provide the contact information on the 2010 sprockets and whether they are early or late part number?
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Who is online
Users browsing this forum: Google [Bot] and 71 guests