Hello
My clutch and brake pedals are frozen together. I have a pretty good idea that I am not the first to have this happen. I am sure that there are a lot of good ideas out there to get them working independently again.
I would like to work on this tomorrow. I have oxy/acet if needed.
Thanks for your help
clutch / brake pedals on 420C
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
- Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
A little heat, then apply some Magic Elixir. Which is 50/50 Acetone and ATF mixed. Works wonders.
The warm (not hot) metal allows the Elixir to soak right in there. The acetone thins the oil so it flows well, and also loosens up rust and gunk in there.
Stan
A little heat, then apply some Magic Elixir. Which is 50/50 Acetone and ATF mixed. Works wonders.
The warm (not hot) metal allows the Elixir to soak right in there. The acetone thins the oil so it flows well, and also loosens up rust and gunk in there.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
brake, clutch rod
When you go back together with it install a grease fitting or oil hole so it never happens again.
Who is online
Users browsing this forum: No registered users and 81 guests