440 sprocket
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
- mapaduke@yahoo.com
- 1010 crawler
- Posts: 420
- Joined: Sun Sep 13, 2009 6:27 pm
- Location: Rochester N.H.
Thanks scampr it probably wouldn't work very well with all the other crawler parts out there. it would be like trying to find a perticular needle in the hay stack. lol
I ended up shimming the sprocket on the good side so it would turn more true then ground the side of it so it wont rub on the rear role, now I can move it around and get the loader back on and the hydraulics working.
Some time in July when the snow is finely gone I will find the good one and swap it out.
I ended up shimming the sprocket on the good side so it would turn more true then ground the side of it so it wont rub on the rear role, now I can move it around and get the loader back on and the hydraulics working.
Some time in July when the snow is finely gone I will find the good one and swap it out.
nothing crawles like a deere
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Back to Lavoy's post about hanging the machine by the sprocket---I bet you could hang it by the sprocket and not damage it. I'm thinking, (1st time this week) the bend happened by a sudden impact rather than a heavy pressure. gregjo 1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
- mapaduke@yahoo.com
- 1010 crawler
- Posts: 420
- Joined: Sun Sep 13, 2009 6:27 pm
- Location: Rochester N.H.
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Are these sprockets hardened? Seems like they are. I know when you smack one with a hammer, it really rings. I've never come across a bent one but, I've seen teeth broken off. We'll probably never know how the sprocket got bent so, make up a story and stick to it. Giving me a brain ache thinking about it. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
My guess would be it was stuck, and someone hooked a chain to the track or sprocket and pulled it out with something large enough to bend it.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Who is online
Users browsing this forum: No registered users and 112 guests