icd water pump pics

johndeere4402-53 · Post by **johndeere4402-53** » Tue Mar 10, 2015 7:28 pm

Any body have any pictures of the water pump pulleys and such on a 440 icd i am having troubles.

johndeere4402-53 · Post by **johndeere4402-53** » Wed Mar 11, 2015 2:03 pm

Anybody?

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Wed Mar 11, 2015 6:09 pm

Are you trying to figure out how the belts go on ?
If you pm me your email I can take a picture of mine and send it to you.

johndeere4402-53 · Post by **johndeere4402-53** » Wed Mar 11, 2015 6:56 pm

No im putting a different alternator on it. The pulleys has another one hacked up on it and i need to get and idea

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Thu Mar 12, 2015 5:57 am

Ok, I believe the early were driven off the water pump and and the later ones were driven off the fan pulley that's what I have.
I've seen a picture on here of one that's driven off the water pump, I can't remember who posted it, try looking through the show and tell section for aney 440 stuff ?

whiteclipse16 · Post by **whiteclipse16** » Thu Mar 12, 2015 8:55 am

Those should help you out.

I won't swear to it that my generator bracket is correct, but it's close.

Why are you switching to an alternator. A working generator and voltage regulator and it'll charge great.

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Thu Mar 12, 2015 10:13 am

Thanks whiteclipse, that's the picture i was thinking of.

whiteclipse16 · Post by **whiteclipse16** » Thu Mar 12, 2015 12:20 pm

http://www.jdcrawlers.com/messageboard/ ... highlight=

The crawler in the link isn't mine, but you can see that his fan has the double groove to run the generator from the fan. He chose to run it from the pump though.
That guy posted a picture somewhere from some old john deere literature with a picture of just the 2-53 engine and you could see the different belt configurations I think. I can't find that though.

johndeere4402-53 · Post by **johndeere4402-53** » Thu Mar 12, 2015 1:46 pm

putting a upgraded one on plus its one wire and clean and i dont have the factory on. My water pump pulley is different ill get some pics

johndeere4402-53 · Post by **johndeere4402-53** » Thu Mar 12, 2015 6:33 pm

could anyone measure the O.D. of theres? mines 3.750 but think its smaller than yours, i havent found 2 of the same 440 icd with different brackets fans and such

whiteclipse16 · Post by **whiteclipse16** » Fri Mar 13, 2015 7:48 am

I'm not able to measure mine, but I will tell you that I had to change my water pump and I believe the pulley that came with the new one wouldn't work so I had to press my old one off my old pump, press the new pulley off the new pump and put my old pulley on my new pump. I may be wrong about that but I think that's what I had to do. The dozer is at another place right now and I won't be there for a while to look.

johndeere4402-53 · Post by **johndeere4402-53** » Sat Mar 14, 2015 8:22 pm

got a pulley made

[/img]

johndeere4402-53 · Post by **johndeere4402-53** » Sat Mar 14, 2015 8:25 pm

got the dozer first coat painted and semi assembled

whiteclipse16 · Post by **whiteclipse16** » Mon Mar 16, 2015 6:31 am

That thing looks great. You need to start a thread in show and tell of all the progress.
I'm surprised how different your blower looks compared to mine.

Couple questions?
How did you get the hydraulic controls to be in the dash like on a gas 440?
In the last pic, what is the steel piece (2" tall x ~8" long) bolted near the grille? It's bolted under the ~12" x ~12" square that would say "440 Diesel"

jtrichard · Post by **jtrichard** » Mon Mar 16, 2015 12:04 pm

2x8 bar is a blade guide

JDcrawlers Messageboard

icd water pump pics

icd water pump pics

Who is online