Good job!

Facts and knowledgebase about John Deere crawlers
Post Reply
mickswiftspy
40C crawler
40C crawler
Posts: 16
Joined: Tue Apr 05, 2005 10:08 pm
Location: San Jose, CA

Good job!

Post by mickswiftspy » Thu Apr 07, 2005 12:56 pm

Hi Lavoy,

The new Message Board is great. For your FAQ section I think it would be helpful to list what dozer blades and loaders, etc. were used on what crawlers, with a description, and your personal take or recommendation on what is good or bad about them. These seem to be fairly common questions. Thanks-Jim

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Thu Apr 07, 2005 1:58 pm

Jim,
Good idea. I am going to try and get a bunch of different stuff in here like that, major holdup is time.
Lavoy

GraderDan
430 crawler
430 crawler
Posts: 56
Joined: Thu Apr 07, 2005 2:06 pm
Location: So. Strafford,Vermont

1010 numbers

Post by GraderDan » Mon May 23, 2005 3:01 pm

Hey Lavoy, was wondering if you were going to list the serail number years and production numbers for the 1010 crawlers sometime, I would really be interested in those myself.
Thanks, Dan

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Tue May 24, 2005 8:13 am

As soon as I find a list that I believe is accurate, I will post them.
Lavoy

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests