Facts and knowledgebase about John Deere crawlers
-
mc_mike
- 430 crawler
![430 crawler 430 crawler](./images/ranks/wrench/spanner_rank_1.gif)
- Posts: 98
- Joined: Mon Nov 28, 2005 11:00 am
- Location: Green Springs, Ohio
Post
by mc_mike » Sun Apr 05, 2009 6:04 pm
Where should the serial tag be for a 440 crawler? On the side of the bell housing like the 420/430? Or is it on the bottom of the console by the operators feet? Thanks for any help.
Mike
-
BKahler
- 440 crawler
![440 crawler 440 crawler](./images/ranks/wrench/spanner_rank_2.gif)
- Posts: 175
- Joined: Mon Apr 04, 2005 9:38 pm
- Location: Richmond, Kentucky
-
Contact:
Post
by BKahler » Sun Apr 05, 2009 6:32 pm
Mike, on my 440ICD the plate is below the dash on the around the operators feet.
Brad
-
CELSESSER
- 1010 crawler
![1010 crawler 1010 crawler](./images/ranks/wrench/spanner_rank_3.gif)
- Posts: 260
- Joined: Sat Sep 08, 2007 3:05 pm
- Location: Northern Michigan
Post
by CELSESSER » Mon Apr 06, 2009 7:27 am
Mike,
On the gas it should be on the flat spot cast on the bellhousing on the left side. On a diesel it is on the dash pedistal below the dash like Brad said.
Chuck
1960 440ICD #461094 w/ #63 manual blade Converted to a gas engine two owners ago.
Who is online
Users browsing this forum: No registered users and 72 guests