fluids filters and capacities

[digitup2]

[/img]








Nither I or my daughter could get these things any bigger so if some one can here is the info from a 1983 publication of Deere's own showing filter and o ring part #as well as fluid and amount needed to fill the area to capacity .Digitup.

[CCWKen]

Wow! Great intentions but way too small to read.

Looking for fluid caps on 420C trans and final. Got all excited when I saw the topic then let-down city. Bummer!

Thanks for trying though.

Ken

[Stan Disbrow]

Hi,

I will head for the shop in a little bit and look that up for you....

The pics are a tad too low res for me to do anything with them, though.

Stan

[Stan Disbrow]

Hi,

420c

Fuel: 10.5 Gallons
Crankcase: 5 Quarts
Trans and Diff: 6 1/2 Quarts
Final Drives: 7/8 Quart (each)
Cooling: 3 1/2 Gallons
Hydraulic: 9 Quarts (single or dual cylinder)

Stan

Edit: As long as I am into manuals in the shop...


40c

Fuel: 10.5 Gallons
Crankcase: 5 Quarts
Trans and Diff: 6 1/2 Quarts
Final Drives: 7/8 Quart (each)
Cooling: 3 1/2 Gallons
Hydraulic: 9 Quarts (single cylinder)
11 Quarts (Integral System)


440ic

Fuel: 10.5 Gallons
Crankcase: 5 Quarts
Trans and Diff: 8 Quarts
Final Drives: 7/8 Quart (each)
Cooling: 2 3/4 Gallons
Hydraulic: 9 Quarts (single or dual cylinder)

So, all the old iron is pretty much the same.

Stan

[CCWKen]

Thank you, Stan!