john deere track loosing problem

Facts and knowledgebase about John Deere crawlers
Post Reply
dehli farms
MC crawler
MC crawler
Posts: 4
Joined: Wed May 02, 2012 7:22 pm

john deere track loosing problem

Post by dehli farms » Tue Sep 04, 2012 8:40 pm

track problem 450c crawler loader i run the track off the other day, how do you loosen the track, or get that piston to slide into the yoke, i took the bleed screw and grease zerk out and tried to pull it togather with two comealongs and it will not move, what iam i doing wrong, please help THANKS

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1891
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Tue Sep 04, 2012 10:21 pm

how rusty is it? it sounds like its froze can you push up against something solid with the loader up .....with a 6 way you can use a block between the blade and the track but you have a loader ......you can use some heat on the tube so it will expand while you are pushing or pulling hope this helps
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

77 Ford
1010 crawler
1010 crawler
Posts: 285
Joined: Tue Nov 22, 2011 7:52 pm
Location: Missouri

Post by 77 Ford » Wed Sep 05, 2012 6:59 am

I had a stuck adjuster and used a tractor to get it broke free. I just popped it a few times with the loader bucket of the tractor.
JD- 450C track loader
Serial #208336T

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest