For Sale: Industrial Yellow 3 roller 40 crawler, 14" pads, no blade, has hydraulics, 14" pads. This crawler has not come in the shop yet, but will be shortly. Call or e-mail if you are interested.
Thanks,
Lavoy
Yellow 3 roller 40 for sale
converting no hydraulic to hydraulic on 40's
was wondering about the 40's with no hydraulics.(1953 model)
can they be converted simply?
has anyone put on an alternate hydraulic system?,,, like a different pump run from other than a stock setup?
i see some models had a secondary unit coming out of the rear,, ,,, is it possible to add this models secondary or might the castings or something else render it unfeasible?,,this crawler has the 540 pto,,,
can they be converted simply?
has anyone put on an alternate hydraulic system?,,, like a different pump run from other than a stock setup?
i see some models had a secondary unit coming out of the rear,, ,,, is it possible to add this models secondary or might the castings or something else render it unfeasible?,,this crawler has the 540 pto,,,
Factory hydraulics can be added, you just need to parts to do it. You could put something like a Prince PTO pump on the back, but you will not have live hyd then. You would also need a reservoir, and a valve with a bypass in it. I have seen pumps mounted on the front and driven off the crankshaft, but usually they butcher the sheetmetal when doing so.
Lavoy
Lavoy
Okay, finally was able to get some time in on the 40. The crawler will have new fibers and steels on both sides, pressure plates were already new I found when I got it apart. It has excellent undercarriage, 14" single bar grousers, hyd, good sheetmetal. Have not had it runnning yet, fuel tank is at the rad shop getting steamcleaned, should have it next week. Also will be putting on new muffler, carb kit, and tune-up parts.
Lavoy
Lavoy
3 roller
do you still have this crawler? and if you do send me some pictures. sellcl@uwec.edu
Who is online
Users browsing this forum: No registered users and 4 guests