looking for carb kit

Parts, Services, and For-Sale
Post Reply
User avatar
justjd420
40C crawler
40C crawler
Posts: 24
Joined: Sat Mar 01, 2008 5:05 pm
Location: Rome, New York

looking for carb kit

Post by justjd420 » Tue Apr 13, 2010 7:49 am

I am looking to purchase a carb kit for my 420 crawler. I also need the throttle fly and screws. I also would like to know if anyone had a problem with thier throttle becoming stuck wide open? This happened to me and I was not able to decrease the throttle (sounds like a toyota). When I took the carb off I noticed that the throttle fly and screws were missing??? It wasn't in carb so could it had been pushed out the exhaust? Engine was running fine with no knocking or power loss.
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Apr 13, 2010 9:10 am

Carb kits come with throttle shaft and screws, I might have a used throttle plate on hand, or can get new.
Lavoy
Top
User avatar
justjd420
40C crawler
40C crawler
Posts: 24
Joined: Sat Mar 01, 2008 5:05 pm
Location: Rome, New York

Post by justjd420 » Tue Apr 13, 2010 10:44 am

I will be interested in purchasing the kit and throttle plate new or used. Please send me the ordering instructions. My email is jrotolo314@aol.com
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Apr 13, 2010 1:50 pm

Just send me an e-mail with your shipping address, and I will start looking to see what I have on hand.
Lavoy
Top
Post Reply

Return to “Lavoy's Little Shop O' Deeres”

Who is online

Users browsing this forum: No registered users and 1 guest