Parts, Services, and For-Sale
-
jackhdn
- 420 crawler
![420 crawler 420 crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 39
- Joined: Tue Apr 05, 2005 6:02 pm
- Location: Buckland Massachussets
Post
by jackhdn » Mon Nov 22, 2010 8:49 pm
Hey Guys,
It is not an easy decision but I am thinking about selling my 1960 440. Had a baby boy this month which is great, will need a new car in the spring, and the 440 just does not get used much anymore.
Crawler was thoroughly gone through in 2005-2006. Bottom is 90%. Many new rolls and 2 new sprockets when rebuilt. All new bearings in finals, many new bearing in transmission. New Radiator, water-pump, complete valve job (new valves/guide)....Just too many part and too much work to possibly list.
Well built brush cage. Ramsey 8000 pound winch. Gas, 5 speed. No reverser.
I'm not 100% on selling it yet but sure would appreciate a couple opinions on what one in this condition would go for. (I know it is a tough question).
Thanks,
Jack
Pics of the rebuild can be seen at:
http://home-and-garden.webshots.com/alb ... 0193tGIjIE
![Image](http://www.jdcrawlers.com/uploads/img_1444_1.jpg)
[/img]
-
shinnery
- 350 crawler
![350 crawler 350 crawler](./images/ranks/wrench/spanner_rank_5.gif)
- Posts: 774
- Joined: Fri Jan 27, 2006 4:55 pm
- Location: Hawley, Texas
Post
by shinnery » Mon Nov 22, 2010 11:27 pm
With today's fuel prices, location is very important and you are just too far from west Texas for me to give very much. Also, this is just my opinion for whatever it is worth, the visable track is a little too tight.
Bryce
![Smile :)](./images/smilies/icon_smile.gif)
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
-
jackhdn
- 420 crawler
![420 crawler 420 crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 39
- Joined: Tue Apr 05, 2005 6:02 pm
- Location: Buckland Massachussets
Post
by jackhdn » Tue Nov 23, 2010 6:38 am
You are absolutely right on fuel prices and the track. Only picture I have of it at the moment. Thanks.
-
pop pop
- 1010 crawler
![1010 crawler 1010 crawler](./images/ranks/wrench/spanner_rank_3.gif)
- Posts: 490
- Joined: Thu Aug 27, 2009 12:07 am
- Location: chandler, arizona
Post
by pop pop » Tue Nov 23, 2010 12:54 pm
probably ask 6,,,problem is nobody appreciates a "gone-thru " machine. good luck
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
-
JD440ICD2006
- 350 crawler
![350 crawler 350 crawler](./images/ranks/wrench/spanner_rank_5.gif)
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
Post
by JD440ICD2006 » Tue Nov 23, 2010 1:58 pm
I do not feel that all buyers do not appreciate a "gone through" machine. Yes, there are those buyers that are just waiting on the low ball deal, and they will try to scare a seller with any comment to get a low price. But then, try to buy something from them and the story changes dramatically. The machine or group of parts that was not worth much suddenly becomes VERY valuable.
You have a very nice and mechanically sound 440IC. Most of them out there would not compare to this one so it will command a higher price. An average 440 IC that runs but needs some work should bring $5-6K. Yours is much more valuable that that.
The right buyer will come along that understands that he can pay you, or he can go buy a pile of junk and who knows what it will cost him to get it all repaired and running properly.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
-
JWB Contracting
- 2010 crawler
![2010 crawler 2010 crawler](./images/ranks/wrench/spanner_rank_4.gif)
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Post
by JWB Contracting » Tue Nov 23, 2010 2:18 pm
These are a real popular collector machine in Alberta. I personally would want $7K plus for it.
Dozer are getting really scarce, too many old guys with them sitting in the shed. My dad is one of them, if he buys a green crawler it absolutely goes in the shed along with a few yellow ones. He is at over 50+ deere crawlers and 100 crawler/tractors in total.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
-
jackhdn
- 420 crawler
![420 crawler 420 crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 39
- Joined: Tue Apr 05, 2005 6:02 pm
- Location: Buckland Massachussets
Post
by jackhdn » Wed Nov 24, 2010 3:43 pm
Thanks for the replies guys. I appreciate the different opinions. No rush here, just thinking it over and wanted some thoughts.
Jason---50 Deere crawlers...I would love to see that! Must be some kind of a record.
Happy Thanksgiving to you all.
Jack
-
JWB Contracting
- 2010 crawler
![2010 crawler 2010 crawler](./images/ranks/wrench/spanner_rank_4.gif)
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Post
by JWB Contracting » Thu Nov 25, 2010 8:55 am
All were runners and were drivin into the sheds. Very few are painted, he is going for quanitity. I picked up the exact machine you are posting here but with a factory winch for $4K about 15 years ago. It had brand new undercarriage. It was on consigment at the deere AG dealer, we drove two hours to the owners house with cash to ensure we were the new owners.
I think we now have 3 440 loaders and most likely 2 outside mount and 2 inside mount dozer machines. The 440 is personaly one of my favorite machines. Now looking for a 440 ICD with the 6 way hydraulic dozer. It is difficult to find them in any decent condition as most people run then into the ground. We often get the old machines in when someone comes to buy parts (We have wrecked 25+ deere crawlers) and we get them to trade it in on a runner. Just have to be patient.[/b]
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Who is online
Users browsing this forum: No registered users and 25 guests