420, 420, 440, 1010, early 1010 pins and bushings

[Lavoy]

I am close to a final quote on importing some Berco pins and bushings for the 420 through early 2010 crawlers, 1" pin, 1 9/16" bushing. I should have a little better handle on time frame yet this week I hope. Best case scenario I would assume to be 2-3 months from date of order to the time they get to me.
The price will be $1000 per set (two sides, up to 36 links per side) FOB my place, freight to you would be extra. There will only be a finite number coming in, don't know as of yet how many. If enough people want them, I am going to try and get extra.
They will be first come, first served until gone. If you want to pre-order and pre-pay for a set, I will knock $100 off and you are guaranteed a set, or however many sets you want as long as they are paid for in advance. I will not hold sets for anyone without them being paid for, been there, done that, learned my lesson.
If interested, let me know, and I will let you know when I get a firmer date on possible delivery.
Lavoy

[dustin]

What's the average price of labor to rebush a track at your shop?

Thanks

[Lavoy]

Normally $350. If I have to do a lot of link repair, then it goes up some.
This also assumes I do not need to remove pads. On MC or BO Lindeman, I can not work with the pads on, they hit the press ram.
Lavoy